Page 97
Bottle Mode
• Unlock icon energizes the bottle bay door lock for five seconds, allowing you to
open the door.
• Done icon returns you to the bottle mode dialog box.
13. If the test failed or you have rejected the calibration, touch the cancel icon, then touch
the checkmark icon to run the calibration again (see Figure 79) or the cancel icon to
cancel the run.
• Checkmark icon returns you to the beginning of the test. All previous data are
discarded.
•Cancel icon takes you to the unload/replace bottles dialog box.
Figure 78 Unload/replace bottles dialog box
Figure 79 Run again dialog box
To Next Page
Loading...
