Table 1 Icon description (continued)
Icon Description
Starts the qualification procedures: calibration, SST500, background, SDBS,
SST8000 and accuracy tests.
Shows the maintenance procedures for the instrument.
Shows help and more information.
Shows when a user is logged into the instrument.
Shows when no user is logged into the instrument.
Selects the previous screen.
Saves the information on the selected screen and moves to the next screen. If this arrow
is selected at the end of a configuration, a procedure starts.
Shows the currently-selected screen.
Startup
Log in as the administrator
1. Push Log In on the home screen.
2. Select "admin" from the list of users.
3. Enter the password: password
4. Enter a new password.
Make sure to record the new password.
5. Push Save.
6. After successful log in as the administrator, make specified user profiles. Refer to Add, change or
remove a user on page 14.
Operation
Configuration
Set the system settings
Use the touch screen or connect a USB keyboard and a USB mouse to do the steps that follow.
1. Push Instrument Setup> System Settings.
2. Select an option.
Option Description
Date & Time Sets the date format, the time format, and the date and time.
English 13
To Next Page
Loading...
Need help?
General
