Haemonetics TEG 6s - Configuring Settings

44 Chapter 4, Getting Started
P/N 115191-IE, Manual revision: AB Haemonetics
®
TEG
®
6s User Manual
Configuring Settings
With Administrator privileges, you can access the Settings screen to do the
following:
 Configure date and time settings including:
 Set the current date and time
 Specify the date and time styles
 Change the time zone
 Configure LAN settings
 View version information and the IP address
 Calibrate the touchscreen
Caution: Make sure that the system date and time are set correctly. The
analyzer uses the system date and time to prevent the use of an expired
cartridge.
Note: If you do not have Administrator privileges, all functions accessible from
the Settings screen are read-only except the update password function.
Configure date
and time
settings
From the Settings screen, you can set the current date and time and choose
the desired style for how the date and time display on all screens.
Notes:
 Altering the date and time settings does not affect previously run tests.
 You must restart the analyzer for date and time changes to take effect.
To configure the date and time settings:
1. Log in as an Administrator, and then on the Home screen, touch
settings. The Settings screen displays.