Teletext Language
Digital teletext language:• To select
the teletext language.
See g. 63 and 64.
Decoding page language:• To set
the teletext language to the regional
location.
Common Interface
The common interface is for a •
Conditional Access Module (CAM).
This function displays your TV software
information.
See page 37.
HDMI Scan Info (HDMI only):
When you use HDMI mode, you can
choose the following mode.
Automatic: • Set to underscan or
overscan automatically when the video
signal is detected.
Underscan: • When the video signal is
detected, all active pixels and lines are
displayed with or without border.
Overscan: • When the video signal is
detected, some active pixels and lines
at the edges are not displayed.
OAD
When you get the software updating •
news from the retailer or internet, you
can update the operation software
using the OAD (Over Air Download)
Download. The updated software data
will be transferred through the TV
signal.
See page 38 for details.
MENU OPERATION
To Next Page
Loading...
