Haier LT32F6 - Oad Operation

| HD Ready LCD TV | User Manual
p.42
OAD for Software Update function
When you get the updating news from 1.
the TV shop’s web, you can update the
operation software using the Download
menu. The data for various units are
transferred consecutively on a special
receiving channel.
You need to search the channel with 2.
updating code stream.
NOTE: you can get information from
the TV shop or internet.
Operation
When you search the channel. You will 1.
get a information.
See g. 92.
Press ▲ ▼ to conrm if you would 2.
like to “Accept” this new software or
“Remind me Later” and use ► button
to action update new software.
See g. 92-96.
After the programming , please use ▲ 3.
▼ to conrm if you would like to restart
the TV. The software will be updated
completely after restart the TV.
See g. 97.
NOTE: You must not switch off the unit
during this process!
Software ID : XXXXXXXX
A New Version of software is detected.Do you want to upgrade
it?
Over Air Download
Select Next
Accept
Remind me Later
g. 92
Software ID : XXXXXXXX
Searching
0%
Over Air Download
Back
g. 93
Software ID : XXXXXXXX
Searching... This process may take up to 25 minutes
12%
Over Air Download
Back
g. 94
Software ID : XXXXXXXX
Seraching.
Over Air Download
Select Next
Accept
Reject
g. 95
Software ID : XXXXXXXX
Programming...
Warring : During the process. Please do not unplug the TV Set
power code as this lead to defective TV Set.
69%
Over Air Download
g. 96
Software ID : XXXXXXXX
Software upgrades successfully! Restart the TV now?
Over Air Download
Select Next
Accept
Reject
Exit
OK
g. 97
OAD OPERATION