Haier LT32F6 - Antenna and Power Connection; Antenna Connection; Power Cord Connection

| HD Ready LCD TV | User Manual
p.10
WARNING:
- Switch off the TV before
connecting any external device.
CONNECTING THE ANTENNA
Connect the Antenna Plug to the 1.
Antenna Input
16
located at the rear of
the TV.
See g. 6.
For optimum picture quality, adjust 2.
antenna direction if needed.
To improve the picture quality in a 3.
poor signal area, you may use a signal
amplier (not included).
AC POWER CORD CONNECTION
NOTE: Make sure your local voltage is
230V/240V~, 50Hz.
Connect the AC Power Cord 1.
25
to the
mains socket.
See g. 6.
ANTENNA CONNECTION
Antenna Plug
25
16
g. 6