Setting Up
41
EQUALIZER & REVERB
The Equalizer and the Reverb effects give the final touch to the tone.
The Equalizer regulates the tone, and the Reverb adds the resonance of the hall
performance.
You can control portions of their functions on the panel buttons and knobs
EQUALIZER
[TONE] KNOB
One optional Parameter out of the Equalizer is assigned and regulated.
When delivered from the factory, TREBLE is assigned, and, as you turn it to the right,
the treble is emphasized, and, to the left, the trebel is reduced.
[TONE TYPE] BUTTON
This assigns the settings to the [TONE] KNOB.
At every touch, the assignment changes in the order of TREBLE, MIDDLE and
BASS. The initial letter of the word is displayed in the PLAY mode.
NOTE: For further details, please read the section “EQUALIZER” (P. 72)
REVERB
[REVERB] BUTTON
This is for switching ON and OFF the Reverb Effect.
To get the Reverb Effect, press the button and the LED will light.
NOTE: You can change the time and the depth of the Reverb. (P. 73)
The illustration indicates
TREBLE is at +9.
To Next Page
Loading...
Need help?
General
