Need help?Do you have a question about the Hanasis HIT and is the answer not in the manual?
Read safety instructions carefully to prevent damage and injury.
Overview of the POS system's features, design, and technology.
Detailed hardware specifications and available options for the POS system.
Visual identification of ports and components on the POS system.
Instructions for removing protective tape before product setup.
Guide on how to adjust the monitor's angle for optimal viewing.
Steps to connect the power cable and turn on the system.
Calibration process for the touch screen for accurate input.
Proper procedure for using the magnetic stripe reader (card reader).
Serial cable connection specifications for a kitchen printer.
Instructions for backing up the current Windows user environment.
Steps to recover the system from a backup or to factory default.
Information on drivers and utility software available on the D drive.
Instructions for separating the magnetic stripe reader (MSR).
Procedure for separating and removing the product stand.
Guide for replacing the internal storage device (HDD or SSD).
Steps for removing the rear cover of the system.
Instructions for separating the EMI shielding component.
Setup and power cable connection for the 9.7" second monitor.
Installation steps for the customer display (VFD).
Instructions for installing the system using a wall mount.
Guide on accessing and configuring BIOS settings.
Schematic overview of the system's internal components and connections.
Diagram showing the arrangement and labels of motherboard components.
Explanation of jumper settings, including CMOS clearing.
Pinout details for serial ports (DSUB 9 Pin and RJ-45).
General| Brand | Hanasis |
|---|---|
| Model | HIT |
| Category | Touch terminals |
| Language | English |
To Next Page
