Hanna Instruments Edge User Manual

Setup/Installation
22
Viewing
Logged Data
If no data was logged for the selected measurement
range, the instrument displays the following
messages (ex. for pH range):
No Manual Logs
No Stability Logs
Press CFM to enter inside lot information to view memorized records.
Use the ARROW keys to toggle between dierent records.
Use u to display GLP data.
Press CLR then CFM when deleting records or lots.
Press RCL to exit the lot you are viewing.
Press RCL to return to the measurement screen.
Delete Record/Lot
Press RCL and select measurement log.
Use the pq keys to select the Manual/Stability
records or Interval lots to delete. The instrument will
display “CLEAR MANUAL” for MANUAL, “CLEAR STAB”
for STABILITY.
For Interval lots, the message “Clear” followed by the
selected lot will be displayed with “CFM” tag blinking.
Press the ARROW keys to select a dierent lot. Press
CFM. The instrument will display “PLEASE WAIT”.
For Interval, use the pq keys to select a dierent
lot. Press CFM. The instrument will display “PLEASE
WAIT”.
“CLEAR DONE” is displayed for a few seconds after
the selected Interval lot is deleted.

Hanna Instruments Edge Specifications

General

Brand	Hanna Instruments
Model	Edge
Category	Multimeter
Language	English