Hanna Instruments Edge - Page 45

Operational Guide
45
Range Specic Messages Displayed On Alphanumeric Line During
Measurement (3
rd
Lcd Line)
All the messages described in GENERAL section (page 15) are displayed in pH
range.
Temperature Sensor Problem (if there is one)
Cal Due or Oset and Slope Value
Time
Date
Battery or Charge Status
Logging Messages
The specic CALIBRATION INFORMATION that can be viewed:
• Condition and response time gauge (if calibrated using 7.01, 4.01 or
10.01 buers)
• Calibration buers
• pH calibration Oset (mV) and Slope (%)
• Out Of Calibration Range
This information is displayed if it is enabled in SETUP menu.
pH
Measurement