38
38
SETUP
Press LOG/CFM to save the setting. The new selected option of the parameter will be displayed on the
LCD. Alternatively, press CAL to exit without saving the new settings.
12.4. SET BEEPER
The HI83749 has a built-in beeper that signals the read tag, the pressed key and the error conditions.
The beeper can be selected to be on or off.
• To set the beeper on or off, press CAL/RCL when set beeper panel is displayed. The beeper status
and the CFM tag will start blinking.
• Press the UP or DOWN keys to set the beeper on or off.
• Press LOG/CFM to save the change. The new selected option will be displayed on the LCD.
Alternatively, press CAL to exit without saving the changes.
12.5. SHOW / HIDE THE TIME
You can choose between showing or hiding the current hour and minutes on the secondary LCD.
• To set hiding or showing the time, press CAL/RCL when the “Show/hide time” panel is displayed.
The time show status and the CFM tag will start blinking.
To Next Page
Loading...
Need help?
General
