5
5
PRELIMINARY EXAMINATION
1. PRELIMINARY EXAMINATION
Remove the meter from the packing material and examine it carefully. For further assistance, please
contact your local Hanna Instruments office or email us at tech@hannainst.co.
This HI83749 Turbidity & Bentocheck Meter is supplied complete with:
• Six sample cuvettes and caps
• Four calibration cuvettes (HI83749-11)
• Bentocheck reagent (HI83749-0) and Silicone oil (HI93703-58)
• One 1000 µL automatic pipette with two tips and Instructions sheet
• Four 25 mL glass vials with caps
• One 1 mL syringe with two tips; one Funnel; Filter paper (25 pieces)
• Five tag holders with tags (HI920005)
• Tissue for wiping the cuvettes
• Four 1,5V AA batteries
• AC Adapter
• Instruction manual
• Instrument quality certificate
• Rugged carrying case
Note:Save all packing material until you are sure that the instrument works correctly. Any
damaged or defective item must be returned in the original packing with the supplied accessories.
To Next Page
Loading...
Need help?
General
