33
33
GOOD LABORATORY PRACTICE (GLP)
11. GOOD LABORATORY PRACTICE (GLP)
The GLP feature allows the user to view last calibration data. Also the user calibration can be deleted.
• Press GLP to enter or exit GLP data consulting. Several functions are available when in GLP
menu. Press READto scroll through the GLP data.
The following GLP panels can be viewed.
• The last calibration date, in YYYY.MM.DD format. If no calibration was performed, the factory
calibration message, “F.CAL”, will be displayed on the LCD.
• The time of the last calibration in hh:mm format.
• First calibration point: 0.00 NTU if skipped or the actual read value (e.g. 0.01 NTU).
• Second calibration point.
• Third calibration point (if available).
To Next Page
Loading...
Need help?
General
