48
48
PC INTERFACE
17. PC INTERFACE
To fully use the instrument tag identification system function, the measured data has to be downloaded
to a computer. The instrument can use RS232 or USB connection to communicate with the PC.
When using the RS232 protocol, simply connect a HI920011 serial cable between the instrument
and the computer.
To use the USB protocol, simply connect a regular USB cable between instrument and PC.
In both cases, the PC must run the HI92000 application for successful data transfer.
To allow our users access to the latest version of Hanna Instruments PC compatible software, we
made the products available for download at http://software.hannainst.com. Select the product code
and click Download Now. After download is complete, use the setup.exe file to install the software.
To Next Page
Loading...
Need help?
General
