Meter ID
• Name the meter with a discrete name, location, or number.
• Tap to save.
Note: option available to users with administrator rights only.
Tap or corresponding tab to enable (disable) following settings:
Decimal Separator: comma or period depending on regional preference
Backlight Saver: enabled, 1 to 60 minutes (or disabled)
If the backlight turns off after the set period of time, tap screen to turn it back on.
Beeper: Key, Alarm, Stability
When enabled, an audible signal alerts users in the event of a wrong key press, an alarm condition, or the
stability threshold being exceeded.
Startup Tutorial: if disabled (option enabled as default), the meter does not launch into Tutorial at power on.
Factory Settings
Option restores system settings i.e. resolution for measured data, temperature unit, view mode, and alarm to
original factory values. Restoring factory settings deletes all user information, logs, or configured measurement
profiles. When option invoked, the instrument asks for confirmation.
Note: Option available to users with administrator rights only.
System Menu Items 26
To Next Page
Loading...
Need help?
General
