Hanna Instruments HI98494 - Preliminary Examination

5
PRELIMINARY EXAMINATION
1. PRELIMINARY EXAMINATION
Remove the instrument and accessories from the packaging and examine it carefully. For further
assistance, please contact your local Hanna Instruments Office or email us at tech@hannainst.com.
Each HI98494 is delivered in a rugged carrying case and is supplied with:
• HI7698494 Multi-sensor probe
• HI7698194-1 pH/ORP sensor
• HI7698194-3 EC/TDS/Resistivity/Salinity sensor
• HI7698494-5 Optical DO sensor
• HI764113-1 DO Smart Cap with o-ring
• HI7698295 Short protective probe shield
• HI7698290 Calibration beaker
• HI9828-20 Quick calibration standard solution (230 mL)
• HI7040 Zero oxygen solution set (120 mL)
• HI76984942 Probe maintenance kit
• HI920016 USB cable
• 1.5V AA alkaline batteries (4 pcs.)
• Instrument quality certificate
• Probe quality certificate
• DO Smart Cap quality certificate
• Instruction manual
Note: Save all packing material until you are sure that the instrument works correctly.
Any damaged or defective item must be returned in its original packing material with the supplied
accessories.