58
LOGGING
4. Press Accept to confirm.
5. The Remarks window will open, press Yes to add a remark to the data point or No to skip.
The meter will return to the measurement screen and the log will start.
To stop the meter log, press Log and select “*Stop Meter Log”.
To update the remarks, press Log and select “Log Notes”.
13.3. LOG RECALL
Select “Log Recall” to view logs that are stored on the meter.
Lots
Select this option to view all continuous log files saved on the meter.
1. Use the arrow keys to select the desired lot and then press View. The meter displays a summary
of all data related to the selected lot: number of samples, used memory space, time and date
of the first and last readings.
2. Press View to review the log data. Use the arrow keys to change the sample number in the
selected lot. The sample number is shown on the bottom right corner of the display.
3. Press Info to see record information for the current sample: time and date, remark or serial
number (if available).
4. Press Data to return to the previous screen or Jump to select a different sample in the same lot.
When Jump is pressed, a text box appears to insert the desired sample number.
5. Press ESC key to return to the menu.
6. Press Plot, and the meter will create a list with all available parameters that can be plotted.
7. Use the arrow keys to select the parameter to be plotted. Press Select to view the graph.
To Next Page
Loading...
