45
SYSTEM SETUP
9. SYSTEM SETUP
In the measurement screen press Menu. Use the arrow keys to highlight “System Setup” and press
Select. Use the arrow keys to highlight the desired option and press Select.
Note: When the password protection is enabled, authentication will be required before any
modification.
9.1. METER SETUP
There are 14 items in the Meter Setup menu.
Pressing the corresponding numerical value will bring you directly to that position in the list.
1 Menu 6 Error Beep 11 Meter ID
2 Date 7 Decimal Separator 12 Language
3 Auto Poweroff 8 LCD Contrast 13 Delete Paired Devices
4 Tutorial 9 LCD Backlight 14 Restore Factory Settings
5 Key Beep 10 Meter Password
Time
Option: 12 or 24 hours
Press Modify and set the time using the keypad.
Press Format to change between 12 and 24 hours.
When the 12 hour format is used. Use the down arrow to get to the ante or post meridian abbreviation.
The first letter can be changed by pressing any key.
Press Accept to save the option or press ESC key to return to the menu.
To Next Page
Loading...
Need help?
General
