56
LOGGING
13. LOGGING
The HI98494 and the HI7698494 multi-sensor probe offer two types of logging: meter only
parameters, and meter and probe parameters.
ter only parameters Meter & probe parameters
From measurement mode, press Log to access Log menu.
The data logged on the meter are organized by lots. Up to 50000 complete records can be stored in up
to 100 lots. Each lot can store log-on-demand records or continuous records with different parameter
configurations.
Note: The values displayed for DO concentration, compensated conductivity and TDS are
dependent on the coefficients defined in Parameter Coefficients in Setup menu (EC Reference
Temperature, EC Temperature Coefficient, TDS factor and Salinity). If parameter units or
coefficients are altered, stored logs on this meter will be altered reflecting these changes. Save
logs to a PC before altering parameters or coefficients. Details are available only for the enabled
parameters.
To Next Page
Loading...
Need help?
General
