53
STATUS
11.3. GLP
GLP (Good Laboratory Practice) is a set of functions that allows the user to store or recall data regarding
the probe calibration. GLP data stores the last five calibrations.
Note: If no user calibration data is available for the selected parameter, “Factory Calibration”
message is displayed.
To navigate the GLP screens:
• Use the arrow keys to scroll through the stored data for the last 5 calibrations.
• Press ESC key to return to the menu.
pH
pH GLP screen displays: offset, acidic slope, basic slope, buffers used, time and date of the calibration.
Notes: A “C” label next to the buffer value indicates a custom point, while an “H” indicates a
Hanna Instruments standard buffer value.
If a quick calibration was performed, the buffer values are replaced with the “Quick Calibration”.
ORP
ORP GLP screen displays: calibration point, offset between measured and calibrated value, time and date.
To Next Page
Loading...
