Harman EASY Touch Control Owners Manual
36
Software Updates
1. Go to downloads tab of any Harman pellet
stove with EASY Touch Control and nd the
software update area. (Example: http://www.
harmanstoves.com/Products/Absolute43-
Pellet-Stove.aspx?page=Downloads).
2. Insert a USB drive into your computer. If the
USB has a HarmanFW folder on it, delete
the folder. Click on the EASY Touch Control
software update and “Save As” to the USB
(example: E:\ drive).
3. Go to the location of the le you just saved.
Right click on the HarmanFW.zip le and select Extract All.
4. When prompted to select the location for the
les, select the USB. (example E:\HarmanFW),
then press Extract.
5. After progress bar is complete, right click on the USB
drive (example E:\)then click Eject to safely remove the
USB drive from your computer.
6. Place the USB drive into the programming port on the side of the EASY Touch
Control.
7. Go to menu page 3/3 and press the
USB icon. On the USB screen, press the
Firmware Update icon and select Yes, You
Are Sure to load software update.
The software update le can be used for all Harman product with the E ASY
Touch Control. The software update le has been placed in the downloads tab of
each unit, for your convenience.
To Next Page
Loading...