Harris APEX User Manual

APEX™ Exciter Incorporating FLO™ Technology
LCD Display Flow Chart Navigating the LCD Display Screens
2604s300.fm
03/08/07 888-2604-001 Page: 3-7
WARNING: Disconnect primary power prior to servicing.
Figure 3-4 APEX Exciter LCD Display Flow Chart, Setup Screens
Exciter
External I/O
Selecting any choice in the Exciter
Setup Screen opens that setup screen.
Selecting Back in any Setup Screen
returns to the Exciter Setup Screen.
RTAC
Filters
Display
Serial I/O
User Setup
Diagnostics Setup
Factory Setup
Note: Selecting Home from any screen
Selecting Fault from any screen
returns to the Main Screen.
returns to the Exciter Status Screen.
System Setup Screen
See page 3-32
Screen 1 of 2
Exciter Setup
See page 3-35
RTAC Setup
See page 3-38
Display
Setup
See page 3-41
Power
Calibration
See page 3-38
External I/O
Setup
See page 3-42
Screen 1 of 3
Serial Setup
RS-232
See page 3-45
Screen 2 of 3
Serial Setup
Ethernet
See page 3-46
Screen 3/3
Serial Setup
CAN
See page 3-47
Change
Passwords
FLO
FPGA
Screen 1 of 5
FPGA
Configure
See page 3-48
Restore
Defaults
See page 3-55
Unlocked
(or Locked)
See page 3-54
Unlocked
(or Locked)
See page 3-54
Unlocked
(or Locked)
See page 3-55
Screen 3 of 5
FPGA
Configure
See page 3-50
Screen 2 of 5
FPGA
Configure
See page 3-49
Screen 4 of 5
FPGA
Configure
See page 3-51
Change Password >
Security Setup
See page 3-53
Screen 5 of 5
FPGA Configure,
Restore Default
Setup
See page 3-52

Harris APEX Specifications

General

Brand	Harris
Model	APEX
Category	Transmitter
Language	English