Harris NUCLEUS - Chapter 1: Introduction and Installation; Overview of NUCLEUS and NUCLEUS-DM

NUCLEUS Installation and Operation Manual 1
Chapter 1
Introduction and Installation
Overview
Using industry-standard IP networks, NUCLEUS
™
and
NUCLEUS
™
-DM provide control and monitoring of CCS network
devices including the following:
•X75
TM
multi-path converter/synchronizer
•NEO
TM
and 6800+ modular platforms
• Platinum
TM
, Integrator
®
, Integrator
®
Gold, and Panacea
TM
routers
• Videotek
®
(certain) test and measurement products
• IconLogo devices
NUCLEUS (see Figure 1-1 on page 3) is a rack-mount control panel
and NUCLEUS-DM (see Figure 1-2 on page 3) is a desk-mount control
panel.
The type of devices that you can control with NUCLEUS and
NUCLEUS-DM depends on the software license control options that
are activated on the panel. Your NUCLEUS control panel is shipped
with at least one software license activated. Table 1-1 on page 2 lists
each software license control option that can be purchased for
NUCLEUS.