22 NUCLEUS Installation and Operation Manual
Chapter 2: Operation
3. To view information about an alarm, select it from the list of active
alarms, and then press Enter.
Figure 2-7. Active Alarm Information
4. Press Enter to acknowledge the alarm. Acknowledging an alarm
removes the alarm from the Active Alarms list after you exit from
the Options menu. Press Exit if you choose not to acknowledge the
alarm. The alarm will then remain on the Active Alarms list.
5. Press the Exit button to go back the alarms list or to navigate back
to the Options menu.
Configuring Alarms
Using the Configure Alarms menu, you can enable, disable, and
configure alarm settings. To access the Configure Alarms menu, press
the Option button, and then select Configure Alarms from the list.
6800+ devices must be Q-SEE
TM
compliant to support control panel
functions for configuring alarms.
To Next Page
Loading...
Need help?
General
