NUCLEUS Installation and Operation Manual 21
Chapter 2: Operation
Alarms
Each product in your network has a list of default minor and major
alarms. Using the NUCLEUS control panel’s Active Alarms and
Configure Alarms menus, you can view information about active
alarms; you can enable, disable, and configure any alarms that are
received at the control panel. These menus are accessed from the
Options menu.
Device alarm notifications are not visible while you are using
NUCLEUS to operate a routing panel.
Viewing Active Alarms
When device alarms are active, an alarm notification appears in the
control panel display. The device name bar turns yellow for minor
alarms and red for major alarms. Using the Active Alarms menu, you
can view information about these alarms.
To view detailed alarm information follow these steps:
1. Press the Option button.
Figure 2-6. Active Alarms
2. Select Active Alarms from list, and then press Enter.
A list of the currently active alarms for the selected device appears.
To Next Page
Loading...
Need help?
General
