NUCLEUS Installation and Operation Manual 9
Chapter 2
Operation
Overview
This chapter includes information about NUCLEUS’ generic features.
It does not include information that is specific to the control options
activated on your NUCLEUS control panel. See your appropriate
NUCLEUS control option configuration and operation manual for
detailed information about using control options on NUCLEUS.
Except where noted, the term NUCLEUS is used in the manual to
refer to both NUCLEUS and NUCLEUS-DM.
The following topics are found in this chapter:
• “NUCLEUS Operational Overview” on page 10
• “Using Panel Controls” on page 12
• “Using the Option Menu” on page 18
• “Alarms” on page 21
• “Setting Up the Clock” on page 25
• “Enabling/Disabling the Control Panel” on page 26
• “Updating Software on the Control Panel” on page 26
• “Troubleshooting” on page 31
To Next Page
Loading...
Need help?
General
