Haulotte HA26 RTJ PRO SW - No Engine Start; No Arm

166 4000662720 E 06.17 USA / EN
F - Simplified breakdown guide
HA26 RTJ O - HA26 RTJ O SW - HA26 RTJ PRO - HA26 RTJ PRO SW - HA80 RTJ O - HA80 RTJ PRO
4 - No engine start
• Battery GB1.
• Emergency stops SA900/SB801/SB802.
• Engine start touch pad SA905ST.
• Engine start button upper controls SA303.
• One or more toggle switch or joystick not in neutral position.
• Fuel level SQ300.
• Temperature water engine ST302.
• Oil engine pressure sensor SP300.
• Engine overheating ST300.
• Relays KA3/KA4/KMG/KMP.
• Relay KM3 (for Tiers 4 or petrol gas engines only).
• Relay KA140 (for petrol/gas engine only).
• Load alternator D+, R10.
• Starter M300.
• Electronic accelerator coil YA300.
• Engine speed sensor SV300.
• Preheating conditions KM160.
• Feed pump M301 (for Tiers 4 engine only).
• Fuel pump YA301 (for petrol/gas engine only).
• ECU modules (SPU7066/ Node B2 basket).
• EGV Kubota module.
5 - No arm
• Touch pad SA420 U/D .
• Joystick SM902 off neutral and/or signal out of range.
• Valves YV420/YV420U/D.
• Machine in outreach limitation (SQ420/SQ421/SQ423).
• Machine in overload above 3 meters or wrong calibration.
• ECU modules (SPU/Node B2 basket).
• Flow control valve.
• No pressure.