to be replaced.
(a) Remove the 18 bolts in reverse order as shown in the figure.
2. Removing the lower part of the oil pan
Clue:
(b) Insert a spatula between the top and bottom under
removable surfaces.
ÿ Do not use a screwdriver. Risk of damage to mating
Don Carter.
ÿ Before removing the oil pan, make sure that the
engine oil is completely drained from the engine
lubrication channels.
surfaces!
3. Removing the oil receiver
(a) Remove the 2 bolts and remove the oil receiver.
1. Removing the drain plug
(c) Gently tap the spatula with a rubber mallet
com to separate the details.
(a) Remove the drain plug and completely drain the engine oil.
Clue:
(d) Remove the lower part of the oil pan.
ÿ After removing the drain plug gasket
Note:
ÿ Be careful not to damage the mating
4C20 Gasoline Engine Repair Manual
52
Disassembly
Sealing ring
Machine Translated by Google
To Next Page
Loading...