HBC-Radiomatic technos A - Display Content and Functions; Status Bar; Field Strength Indication; Battery Status Display

11 / 34
Display Content and Functions
Status bar
The upper edge of the display is reserved for the HBC status bar. It shows the field strength, the battery
status as well as the page title and time (if applicable). In addition, the status bar can show additional
symbols, e.g. for cable operation.
Field strength
The field strength indication provides information about the quality of the radio connection. With an
optimum connection, all 5 bars are displayed. The field strength indication is always visible when the
transmitter is in radio operation.
Field strength is indicated in the following degrees:
Perfect reception signal
.
Weak reception signal
.
No reception signal
.
Note:
If the symbol is displayed, the risk of the radio connection being interrupted is imminent. Ensure
that the radio connection is not impaired by an obstacle (e.g. a building) and ensure that you are
within the range of the radio system. It may be necessary to change the working position.
Battery
The battery indication provides information about the current condition of the battery. It is always visible
when the transmitter is turned on.
The battery status is displayed as follows:
The battery is charged
.
Pre
-warning: The battery needs to be charged soon.
The battery needs to be charged. In addition an acoustic signal sounds and the transmitter
vibrates. Exchange the battery. Otherwise, the transmitter will switch off in a few minutes.
Recharge the empty battery in the respective charger.