15 / 34
Software / config
To access the menu item Software / config:
You are in the HBC menu.
1. Navigate to the submenu Information and select it.
2. Navigate to the menu item Software / config and select it.
The software version and the display configuration are shown here.
Exit the menu item Software / config with the Softkey .
Information text
The info text (e.g. crane number) is shown below the logo in the display when the transmitter is activated.
It serves to uniquely identify the transmitter and the machine if the transmitter is used in a location with
several transmitters. The info text can be entered / changed in the menu item Set information text in the
submenu Settings.
To access the menu item Information text:
You are in the HBC menu.
1. Navigate to the submenu Information and select it.
2. Navigate to the menu item Information text and select it.
The current info text is shown here.
Exit the menu item Information text with the Softkey .
Power info
To access the menu item Battery level:
You are in the HBC menu.
1. Navigate to the submenu Power info and select it.
2. Navigate to the menu item Battery level and select it.
The current battery level is shown in a graphic and in percent.
Exit the menu item Battery level with the Softkey .
Personalize
In the submenu Personalize diverse settings can be performed. For example, you can select the language
for the display contents and adjust the display brightness.
To access the submenu Personalize:
You are in the HBC menu.
x Navigate to the submenu Personalize and select it.
Exit the submenu Personalize with the Softkey .
To Next Page
