29 / 34
Catch-Release
Via the Catch-Release option two or more transmitters can control a
machine alternately.
When the receiver is switched on, the machine can initially be controlled
via any associated transmitter. Once the receiver is taken over by one
transmitter, the other transmitters no longer have access.
Take over machine
1. Switch the transmitter on.
2. Enter the "Catch" command on the transmitter and actuate the
start button.
The access rights for the machine remain with that transmitter until the
"Release" command is issued by that transmitter.
Release machine
1. Enter the "Release" command on the transmitter.
2. Switch the transmitter off.
The access rights for the machine are cancelled. Machine control can be taken over by another transmitter.
Operating Example:
Transmitter 1 has taken over the machine. Transmitter 2 is to be given control.
1. Enter the "Release" command on transmitter 1.
2. Switch transmitter 1 off.
3. Switch transmitter 2 on.
4. Enter the "Catch" command on transmitter 2 and actuate the start button.
Transmitter 2 now has sole access to all machine functions.
To Next Page
