HBC-Radiomatic technos A - Inclination Switch

20 / 34
inclination switch
In this menu item you can (de-)activate the safety feature radiomatic
®
inclination switch and adjust the
trigger time and angle.
To adjust the safety feature radiomatic
®
inclination switch:
You are in the submenu Safety functions.
1. Navigate to the menu item inclination switch.
2. Enter your PIN by turning and pressing the radiomatic
®
iCON.
Note:
The factory PIN is
149. To change the PIN, refer to the section Manage PIN in the chapter
Safety
functions.
Activate radiomatic
®
inclination switch
1. Navigate to the Softkey and select it.
2. Set the Softkey to by turning and pressing the radiomatic
®
iCON.
3. Confirm your selection with the Softkey .
Adjust the angle
1. Navigate to Angle and select the preset angle.
2. To adjust the angle, turn the radiomatic
®
iCON to the desired value.
3. To leave the field, press the radiomatic
®
iCON.
4. Confirm your selection with the Softkey .
Adjust the trigger time
1. Navigate to Action time and select the preset trigger time.
2. To adjust the trigger time, turn the radiomatic
®
iCON to the desired value.
3. To leave the field, press the radiomatic
®
iCON.
4. Confirm your selection with the Softkey .
Adjust the start angle for the inclination sensor
1. Navigate to the Softkey .
2. Hold the transmitter in the desired angle.
3. Press the radiomatic
®
iCON.
The current angle is set as the start angle for the inclination sensor.
4. Confirm your selection with the Softkey .