HBC-Radiomatic technos A - Language; Backlight

16 / 34
Language
To access the menu item Language:
You are in the HBC menu.
1. Navigate to the submenu Personalize and select it.
2. Navigate to the menu item Language and select it.
The language for display contents can be selected here.
Exit the menu item Language with the Softkey .
To change the language for the display contents:
You are in the menu item Language.
1. Mark the flag with the radiomatic
®
iCON and press the radiomatic
®
iCON.
2. Turn and press the radiomatic
®
iCON to select the language flag.
3. Confirm your selection with the Softkey .
The new language is set and is immediately loaded.
Exit the menu item Language with the Softkey
.
Backlight
In this menu item, the display brightness can be adjusted in 5% increments.
To access the menu item Backlight:
You are in the HBC menu.
1. Navigate to the submenu Personalize and select it.
2. Navigate to the menu item Backlight and select it.
The display brightness can be adjusted here.
Exit the menu item Backlight with the Softkey .
To adjust the display brightness:
You are in the menu item Backlight.
1. Navigate to the yellow settings bar and select it.
2. To adjust the brightness, turn the radiomatic
®
iCON to the desired value.
3. To leave the yellow settings bar, press the radiomatic
®
iCON.
4. Confirm your selection with the Softkey .
The adjusted brightness is loaded immediately.
Exit the menu item Backlight with the Softkey .