HBC-Radiomatic technos A - Settings; Set Information Text; Master Level

18 / 34
Settings
In this menu item you can enter and change an info text as well as (de-)activate the access to the Master
level.
To access the submenu Settings:
You are in the HBC menu.
x Navigate to the submenu Settings and select it.
Exit the submenu Settings with the Softkey .
Set information text
To enter the information text:
You are in the submenu Settings.
1. Navigate to the menu item Set information text and select it.
2. Enter your PIN by turning and pressing the radiomatic
®
iCON.
Note:
The factory PIN is
149. To change the PIN, refer to the section Manage PIN in the chapter
Safety
functions.
3. Navigate to the input area under Set information text and enter the info text by turning and pressing
the radiomatic
®
iCON.
4. Confirm your selection with the Softkey .
Exit the menu item Set information text with the Softkey .
Master level
The Master level allows access to functions that may only be carried out by authorized personnel.
The access to can be (de-)activated in the menu item Master level.
To (de-)activate the access to the Master level:
You are in the submenu Settings.
1. Navigate to the menu item Master level.
2. To access the access settings for the Master level, enter your PIN by turning and pressing the
radiomatic
®
iCON.
Note:
The factory PIN is
149. To change the PIN, refer to the section Manage PIN in the chapter
Safety
functions.
3. To activate the access to the Master level, select the Softkey ON.
Note:
Access to the Master level is deactivated in the factory settings
.
4. To deactivate the access to the Master level, select the Softkey OFF.
5. Confirm your selection with the Softkey .
Exit the menu item Master level with the Softkey .