10
CMD600
A2820−1.1 en
A complete discovery response packet capture is shown on
Fig. 3: Discovery response packet capture
After receiving discovery response packet measurement application have
enough information to established telnet session with amplifier and set other
parameters.
Discovery procedure II
To ensure the compatibility of CMD600 interface with other customer’s
product there is also additional discovery mechanism implemented.
To ensure the compatibility of CMD600 interface with other customer’s
product there is alsoadditional discovery mechanism implemented.
Network parameters
• Configuration mode (fixed or automatically, ie DHCP) in the case of fixed
’IP addressand subnet mask
• Router Address / Gateway Address i.e. IP address (default route):
telegrams to hostswithin the connected network segments, or arising out of
the configuration resultingroutes are not available, be sent to this address.
An advanced configuration option formore complex routes will not be
implemented because they are for the user in normal andcomplicated
network topologies is not necessary
• TCP port: port number on which the component of a TCP connection in
order tocommunicate with the firmware is adopted. Besides this, more
ports of standard servicessuch as FTP, Telnet, ... serves
• UDP port: This adjustable receiver port number are sent real−time data
To Next Page
Loading...
