HBOT 3D F300 - Device Identification

3. Device Description
10
Electrical parameters
Mains Power 100-240V AC 50-60Hz
Fire safety Class I
Maximum absorption power 450 W
Average absorption power 250 W
Hotbed heating power 300 W
Print head heating power 40 W
Software
Operating system Windows Vista 64, 7, 8.x, 10; Mac OC X; Ubuntu Linux
Firmware Original
PC Software (slicer) Simplify 3D
Compatible le formats STL, OBJ
Compatible CAD software All available
Electronics
Control Electronics Sunbeam 3.0
Processor ARM Cortex M3 32bit
Control Panel Colour touch panel 4,3”
External communication SD Card, USB 2.0
Materials
Container Spool (1kg, 2.3 kg, 4.5 kg, 8 kg)
Diameter 2.85 mm
Maximum extrusion temperature 260°C
Filaments PC-ABS, ABS-X, PP, PLA-X, PLA, ASA-X, PET-G ESD, PET-G, HIPS, TPU, H-GLASS
Alternative** Compatible
** The manufacturer does not guarantee the quality and may refuse warranty repair if you use materials not provided by 3D Printers sp. z o.o.
Other
Warranty 12 months
Certication CE Declaration
Operating costs from 0.5 EUR/h (incl. lament & energy )
3.6 DEVICE IDENTIFICATION
Your device is identied by a serial number. It is printed on:
1. The nameplate located on the back panel of the device
2. In the Warranty Card accompanying the device
Serial number is composed of 13 characters split into 3 parts separated by slash marks: H3D/YYYY/123456.
Example of a serial number: H3D/2015/130234
Always quote the serial number of your device when contacting the Technical Department.