3
Preface
This Manual contains relevant information regarding installation, operation and maintenance of your device. Your are kindly requested
to carefully read this Operating Manual before commissioning your device. Strict compliance with the notes contained herein will
prevent the misuse and allow you to take full advantage of the features and functions of your printer. Store this Operating Manual
so that it is always available to you.
The device, before leaving the manufacturing plant is carefully checked before packaging for safety and functionality on our testing
facilities. As a remainder of this control may be the presence of lament inside the nozzle or on its outer surface.
The 3D Printers Team is constantly working on the development of their products and reserves the right to make changes without prior
notice. You can download the latest version of the Operating Manual from manufacturer’s website at www.hbot3d.com.
1.1. CONVENTIONS USED IN THIS OPERATING MANUAL
Below you will nd explanation of conventions used in this Manual.
Important information, instruction which must absolutely be followed or dangers or dangerous actions which may
lead to serious personal injuries and/or damage to property
Tip, important information
1.2 COPYRIGHT
@ All rights reserved. The contents of the manual, logos, pictures, photos, trademarks as well as other its elements are subject
to copyright of 3D Printers sp. z o.o. in Wrocław
The User has the right to print and store this Operating Manual, as well as to save and retrieve the computer le with a copy hereof in
computer’s memory or other electronic equipment designed to receive and process digital content, for the purposes of operating and
maintaining the device.
Without express permission from 3D Printers sp. z o.o. duplicating, reproducing, adapting, translating, copying, processing,
promulgating, selling, or distributing this Operating Manual (including portions hereof) is prohibited.
1.3 TRADEMARKS USED IN THIS MANUAL
DimaFix – is a registered trademark of DIMA 3D Printers
Simplify 3D – is a registered trademark of SIMPLIFY3D LLC
Microsoft, Windows, Windows NT, Windows Server and Windows Vista 64, Windows 7, Windows 8, Windows 8.1 and Windows 10
– are registered trademarks of Microsoft Corporation
Mac and macOS – are registered trademarks of Apple Inc.
Linux – is a registered trademark of Linus Torvalds
Any other products referred to in the Manual may be registered trademarks of their respective owners.
3D Printers sp. z o. o. shall not claim any right to the said trademarks.
To Next Page
Loading...