6
2.3 RISK OF INJURY AND BURN
To ensure the highest degree of safety and avoid personal injuries, always wear protective glasses and gloves and follow the
instructions. To ensure the highest degree of safety and avoid personal injuries, always wear protective glasses and gloves and follow
the instructions.
Touching the print head during operation is prohibited. Contact with hot print head may result in severe
burns.
Do not touch hot printing platform during device operation. Contact with hot printing platform may result in
severe burns.
Do not put parts of your body, or mechanical parts into operating fans, also prevent your hair or loose parts
of your clothing from getting into moving parts of the printer.
For safety reasons the top and front door must be closed during the printing process.
Keep a safe distance when the device is in operation. Direct contact with moving and hot parts may result in
a bodily injury to the operator.
The nished print should be removed using protective gloves, the scraper provided for this purpose and
after the build platform has been removed from the device.
In the event of burn or bodily injury, follow the general rules of rst aid.
2.4 NOISE EMISSION
The sound pressure level at the workplace where the HBOT3D F300 printer is operated does not exceed 70 dB (A).
2.5 SAFETY MARKING ON DEVICE
The device has “HOT SURFACE” warning labels on relevant parts of the device. Always exercise special care when handling hot parts.
Wearing protective gloves is obligatory. Temperature of some components may reach 300°C.
To Next Page
Loading...