13
©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
5 Technical Data
5 Technical Data
Stud Welding Unit CDi 1502 (with digital display)
for CD stud welding (capacitor discharge welding) according to current standards
Welding range Studs M3 to M8, dia. 2 to 8 mm;
cupped head pins dia. 2 and 2.7 mm;
insulation pins dia. 2 and 3 mm
Welding material Mild steel, stainless steel, aluminium and brass
Welding rate M3 = 40 studs/min. (Charging voltage 60 V)
M8 = 14 studs/min. (Charging voltage 200 V)
M8 = 12 studs/min. (Charging voltage 220 V)
Capacitance 66 000 µF
Welding time 1 to 3 ms
Energy 1 600 Ws
Charging voltage 50 to 220 V (stepless voltage regulation)
Primary power 230 V/115 V, 50/60 Hz, 10 AT
Power source Capacitor
Cooling type F (temperature controlled cooling fan)
IP Code IP 21 (not allowed to use while raining)
Ambient temperature limits 0 °C to 40 °C
Dimension L x W x H 400 x 205 x 250 mm (without handle)
Weight 14 kg
To Next Page
Loading...
