35
©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
12 Welding
12 Welding
First connect up the stud welding unit.
Read and observe here point 11 „Connection“.
Danger for wearers of heart pacemakers
Never operate the stud welding unit if you have a heart pacemaker.
In this case, never remain in the vicinity of the stud welding unit during
welding.
Never operate the stud welding unit if persons with heart pacemakers are
in the vicinity.
Strong electromagnetic elds are produced in the vicinity of the stud welding
unit during welding. These elds may impair the function of the heart pace-
makers.
12.1 Switching on the Stud Welding Unit
1 - Mains switch
2 - Mains fuse
Only now switch on the stud welding
unit at the mains switch (1).
To Next Page
Loading...
