©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
54
16.2 Inspection and Tests
Inspect the condition of the mains cable.
Inform your dealer or maintenance department if you discover any dama-
ge.
Check whether the readings on the display of the stud welding unit are
still legible before starting work.
Clean display and control panel in the event of soiling.
Replace any removed or damaged signs:
Before opening machine disconnect mains
Observe the operating manual
Warning of electric shock hazard
To Next Page
Loading...
