2 Connecting
2–6 Edition October 1998
Servicing work may only be performed by
authorized specialist personnel. The
respective accident prevention regulations
must be observed at all times.
Non-observance of accident prevention reg-
ulations can lead to the loss of accident
insurance cover.
Connect the unit to the power supply using
one the power cables supplied in accor-
dance with the available power supply.
National regulations must be observed
when connecting the unit using power
cables not supplied by Heidelberg Prepress
or when adapting connectors.
Cables used in the USA and Canada must at
least meet SJT standard.
Notes on the power cable:
When connecting to 100 - 127 V or to
220 - 240 V AC, select a cable type from the
table below, whilst taking national regula-
tions into consideration.
To Next Page
Loading...
