Connecting 2
TANGO / TANGO XL – Operation 2–9
8 Installing Calibration Data
Every TANGO/TANGO XL has specific cali-
bration data. These data are stored on a
diskette which is included in the scope of
delivery.
Please make sure that you make a backup
copy of this calibration diskette and keep it
separately in a safe place.
To install the LinoColor software, click on
“TANGO Software” or “TANGO XL Soft-
ware” in the installation window.
If you only wish to add new calibration
data, you only need to click on “Calibration
files for TANGO” or “Calibration files for
TANGO XL”.
During the installation procedure the cali-
bration diskette is requested.
Copy the calibration
diskette
To Next Page
Loading...
