Operation 4
TANGO / TANGO XL – Operation 4–3
TANGO/TANGO XL may only be operated
with all covers and panels in place (danger
of fire)!
8 Power Switch
TANGO/TANGO XL is switched on and off at
the power supply by means of the power
switch.
0 Switching on
Switch the scanner on. The pilot lamps light
up.
The scanning lamp switches itself on.
The scanner can only be operated once it
has been booted and initialized by the
“LinoColor” program.
0 Switching off
Check whether the scanning operation is
finished.
Switch the unit off using the power switch.
The scanner can be switched off at any
time. Scanning operations currently in
progress will be aborted by doing this. An
error message appears on the monitor.
1
To Next Page
Loading...
