Connecting 2
TANGO / TANGO XL – Operation 2–3
8 Correct Usage
The TANGO/TANGO XL is a drum scanner
which is only to be used for this purpose in
accordance with the user manual. Do not
use the unit as a table or support for objects
and liquids.
Ventilation slits should not be covered up.
8 Panels
Before connecting up the unit, make sure
that all panels have been correctly fitted to
it.
8 Installation
Once you have unpacked TANGO/
TANGO XL and pushed it to its final posi-
tion, it must be installed. The following
steps are necessary for this:
■ Connecting TANGO/TANGO XL to the
operating station
■ Connecting TANGO/TANGO XL to the
power supply
■ Switching on TANGO/TANGO XL
■ Installing the “LinoColor” software
■ Installing the calibration data
Do not cover up ventilation slits!
1
To Next Page
Loading...
