5 Mounting Originals
5–12 Edition October 1998
bottom adhesive strip adheres to the
scanning drum and the film is secured.
■ Attach the film at the bottom end and at
the sides using adhesive tape, possibly
cleaning away the adhesive edges before-
hand.
■ Check the results and press out any air
bubbles present.
Note: large transparencies can be fixed
using spray or powder and with the help of
a suitable film. Anti-Newton films can be
used up to an enlargement factor of 400%.
0 Useful tips
■ If possible the film should be as long as
the circumference of the scanning drum
in order to keep the balance error when
scanning to a minimum (1).
■ Arrange the transparencies such that the
bottom quarter of the film remains free,
since the film can go out of shape through
the strong tension exerted on it (2).
2
1 2
To Next Page
Loading...
