6 Service and Maintenance
6–4 Edition October 1998
8 Servicing
In addition to the servicing work listed in
the documentation to be performed by the
user, further servicing work – also during
the warranty period – has to be performed
by the Service Department. This servicing
work is not part of the warranty.
0 Checking the Scanning Drum for
Scratches
If scratches are present on the scanning
drum, polish the area using a polishing
cloth and a polish (order No. 00129038),
until the scratches are no longer visible.
0 Cleaning Agents
When using cleaning agents, observe the
manufacturer’s instructions.
0 Cleaning the Scanning Drum
Rub the scanning drum with a cleaning
cloth to remove dirt. To remove smears and
old anti-Newton coatings, dampen the
cleaning cloth with cleaning agent.
Commercially available cleaning agents:
■ Scanning drum cleaner from Messrs.
Neumann and Partner.
■ RF5337B from Messrs. Röbel and Fiedler.
1
To Next Page
Loading...
