Product Description 3
TANGO / TANGO XL – Operation 3–9
8 Scanning Drum
Drums with a diameter of 150 mm can be
used. TANGO XL also allows you to use
drums with a diameter of 212 mm. The
drums are included in the scope of delivery.
The TANGO/TANGO XL specifications
stipulate that only parts supplied or
approved by Heidelberg Prepress should be
used in TANGO/TANGO XL, as otherwise
faults or even the withdrawal of approval
may result.
This applies particularly to the scanning
drums for TANGO/TANGO XL and TANGO
Copix/TANGO iXL which, for operation at
high speeds and automatic tensioning, must
fulfil specific safety requirements of the
appropriate test institutions.
Only original Heidelberg Prepress scanning
drums guarantee the safe operation of
TANGO/TANGO XL in respect of bonding,
material, geometry, and the safety enquir-
ing components required to comply with
approval standards.
8 Scanning Area
The scanning area for transparency and
reflection modes is the same. The maxi-
mum useful area is
- 450 x 480 mm for TANGO
- 645 x 500 mm for TANGO XL
2
To Next Page
Loading...
