Connecting 2
TANGO / TANGO XL – Operation 2–5
8 Connecting TANGO/
TANGO XL to the
Power Supply
Connectors and outlets of the house instal-
lation must always be easily accessible so
that, in the case of an emergency, the unit
can be disconnected completely from the
power supply by pulling out the power con-
nector.
Connect the unit to the power supply by
means of the three-pin plug and socket
included in the delivery. Only operate the
unit when a earthing conductor is con-
nected.
The power connection is located on the left
at the rear of the unit.
The operator has no access to the fuse.
The unit may only be serviced by the Ser-
vice Department.
Do not install the unit in the vicinity of air-
conditioning systems and protect it from
moisture and direct sunlight.
Caution:
Unauthorized opening of the unit’s housing
and improper repairs not expressly
described in the documentation can lead to
considerable danger for the user.
To Next Page
Loading...
Need help?
General
