Hemisphere GPS S320 - Changing Module Status

S320 User Guide
PN 875-0281-000 Rev C2
Chapter 3: Setup and Configuration
Control Panel Overview
You operate the S320 using the control panel shown in Figure 3-1.
Figure 3-1: S320 control panel
The S320 beeps on any keypress. Table 3-1 describes each button and LED on the control panel.
Table 3-1: S320 control panel items
Diagram
Item
Name
Description
A
Power button
If unit is Off, press and hold until unit powers up (until you hear
one beep)
If unit is On, press and hold for approximately 3 seconds
(until you hear three beeps) to turn unit off